Atmel AT85DVK-07 Specifikace stáhnout pdf (Strana 93)

AT85C51SND3Bx

7632A–MP3–03/06

The control logic of the UVCC pad outputs 2 signals:

• The “session_valid” signal is active high when the voltage on the UVCC pin is higher

or equal to 1.4V.

• The “Va_Vbus_valid” signal is active high when the voltage on the UVCC pin is

higher or equal to 4.4V.

In the Host mode, the VBUS flag follows the next hysteresis rule:

• VBUS is set when the voltage on the UVCC pin is higher or equal to 4.4 V.

• VBUS is cleared when the voltage on the UVCC pin is lower than 1.4 V.

In the Peripheral mode, the VBUS flag follows the next rule:

• VBUS is set when the voltage on the UVCC pin is higher or equal to 1.4 V.

• VBUS is cleared when the voltage on the UVCC pin is lower than 1.4 V.

The VBUSTI interrupt is triggered at each transition of the VBUS flag.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 262 263

Žádné komentáře

Atmel AT85DVK-07 Specifikace Strana 93